Timex M878 사용자 설명서

To select the primary time zone: 

1.   Press SET.
2.   Press DOWN to select PRIMARY, and then press SELECT.
3.   Press UP and DOWN to select the time zone you want to set as primary, and then press SELECT.
4.   Press DONE.

From the Time of Day display: 

1.   Press DOWN to view each alternative time zone. The seconds value changes to identify the time zone  

(T1, T2, or T3) being temporarily displayed.

2.   Press and hold DOWN to make that time zone the primary time zone. A message prompts you to hold the

button until the time zone is changed.

In Time of Day, Chrono, Interval Timer, and Timer modes, you can set up the RUN, CUSTOM 1 and CUSTOM 2

displays to show various statistical data when GPS or ANT+

™

 sensors are active.  

noTe: While these displays have the same name in each mode, they are independent from mode to mode.  

In EACH of these modes:
 1. Press SET.
 2. Press SELECT to open the DISPLAY menu.
 3. Press UP or DOWN to select the display view to customize (RUN, CUSTOM 1, CUSTOM 2), and then  

press SELECT.

 4. Press UP or DOWN to choose 3-Line or 4-Line. Press SELECT to check the display (3 or 4 line) to use  

for the view. 

 5. Press DOWN to select SETUP, and then press SELECT.
 6. Press UP or DOWN to select 3- or 4-LINE to customize, and then press SELECT.
 7. Press UP or DOWN to select the line for which you want to choose a display item, and then press SELECT.
 8. Press UP or DOWN to choose the data that will display in the line, and then press SELECT.  

A check mark appears. 

 9. Press BACK to return to the 3- or 4-LINE menu.
10. Repeat steps 7 through 9 until you have chosen a display value for each line.

noTe: These steps will set up each display, but to select the display for each mode, you need to be in that

mode with at least GPS or one ANT+

™

 sensor active.

In Time of Day, Chrono, Interval Timer and Timer modes, You can select the DEFAULT display or any of the three

customizable displays (RUN, CUSTOM 1, and CUSTOM 2).
1.  Press RADIO to turn on the GPS and/or ANT+

™ 

sensors – the icons will blink.

2.  Press RADIO to cycle through the display views.

Altitude

Feet or Meters

Cadence & Average Cadence

Steps per Minute

Calories

Kilo Calories

Date

DD-MM or MM-DD format

Day

Day of Week

Distance & Segment Distance

Miles or Kilometers / Feet or Meters