Panasonic CZ-RWSC1U 작동 가이드

7. ADJUSTING THE WIND DIRECTION

Please face the fl ap (up-down wind
direction plate) downwards. If it faces
upwards, the warm air will not reach
the fl oor level.

In the Heat Mode

Please face the fl ap (up-down wind
direction plate) upwards. If the plate
faces downwards, condensation
may form and drip from around the
air outlet.

In the Cool and Dry Modes

In the Fan Mode

In All Modes

Displays with Swing Stopped

Initial Setting

Moves Constantly

Fan/Heat Modes

Cool/Dry Modes

• Never try to manually move the fl ap (up-down wind direction plate) that is operated by the remote

controller.

• When the unit stops, the fl ap (up-down wind direction plate) automatically faces downwards.
• When the unit is in heating standby, the fl ap (up-down wind direction plate) faces upward. Also,

bear in mind that the fl ap starts swinging after the heating standby mode is released, but the
display on the remote controller indicates Auto Flap during standby heating as well.

CZ-RWSU1U/CZ-RWST1U/CZ-RWSU2U/
CZ-RWSY1U/Indoor Unit (CZ-RWSK1U)

Setting the Wind Direction

While the unit is operating, every time you press

, the

direction the fl ap faces changes.

Setting Flap to Swing

If you press

to set the fl ap (up-down wind direction

plate) in its most downward facing position, and then
press

again,

is displayed and the fl ap swings

automatically up and down.

Stopping Flap Swing

If you press

again while the fl ap is swinging, you can

stop the fl ap from swinging and set it in place as desired.
Thereafter, if you press

, you can set the wind direction

starting from the most upward position.

• When the unit is in the Cool or Dry modes, the fl ap cannot

stop facing downwards. If you try to stop the fl ap from
swinging while it is facing downwards, it will continue
moving until it is in the third position from the top.

Instruction_eng.indd 13

2012/01/27 16:25:34