Timex W270 EU 103-095001 사용자 설명서

2. Press STOP/RESET/SET to begin setting the timer.
3. Press START/SPLIT (+) or HEART RATE (-) to increase/decrease the

countdown timer values.

4. Press MODE (NEXT) to advance to the next setting option.
5. Press START/SPLIT (+) or HEART RATE (-) to select STOP AT END or

REPEAT AT END.

6. Press STOP/RESET/SET (DONE) to finish the setting process.

1. Tap the watch lens, or press START/SPLIT to start Timer.
2.  A timer melody chime will sound when the Timer reaches zero 

and stops and repeats. The melody can be turned off with the 

press of any button.

3.   If you need to stop or pause the timer, tap the watch lens or 

press STOP/RESET/SET.

4. When finished, press and hold STOP/RESET/SET to reset the

Timer to the original time. If you Press and hold STOP/RESET/SET

a second time you will clear the timer to 0.

Note: If the Repeat timer is set under 15 seconds a single beep will 

ring between repetitions.
Tips:

• H appears in Time display when Timer is running. j appears 

when timer is running and set to repeat at end.

• For repeat Timer operation, repetition number appears on  

bottom of screen.

• Maximum number of counted repetitions is 99.

• Timer will continue to run if you exit Timer mode.
• The INDIGLO

®

 night-light flashes and the timer melody will 

sound when the timer countdowns to zero.

Heart rate recovery provides an indicator of fitness and training 

level. As you become more fit, your heart rate should return more 

quickly to a lower heart rate value at the end of your workout, 

indicating a higher level of cardiovascular fitness.
a slower recovery rate might also indicate a need to take a 

break from training due to fatigue, illness, or other factors.
Your recovery rate represents the change in your heart rate over a 

period of time. Your Digital Heart Rate Monitor records the change 

in your heart rate for any of five preset periods. To set the recovery 

timer duration:
1. Press MODE until RECVRY appears.
2. Press STOP/RESET/SET to clear the last thorough heart rate

recovery reading, if necessary.

3. Press STOP/RESET/SET to toggle a 30-second, one-, two-, five-, or

ten-minute recovery time, or to turn the timer OFF.

While running the chronograph, the recovery heart rate timer will 

begin automatically after pressing STOP/RESET/SET if the watch is

receiving data from the Digital Heart Rate Sensor, and the recovery 

timer is set for a time duration.
NoTE: The watch cannot record a recovery unless it is receiving a 

current heart rate and a valid pulse from the Digital Heart Rate  

W270_EU_Book.indb   19-20

8/9/11   10:07 AM