Honeywell UDC 3300 사용자 설명서

246

UDC 3300 Controller Product Manual

4/00

Other failures may occur that deal with the Power, Output, or Alarms.
Refer to the controller failure symptom in Table 9-7 to determine what is
wrong and the troubleshooting procedures to use to correct the problem.

If a set of symptoms still persists, refer to Section 2 - Installation and
ensure proper installation and proper use of the controller in the system.

If you cannot solve the problem using the troubleshooting procedures
listed in this section, you can get technical assistance by contacting us.
Refer to the contact information in the front of this manual. An engineer
will discuss your problem with you. Please have your complete model
number, serial number, and Software version available. The model
and serial numbers can be found on the chassis nameplate. The software
version can be viewed under Setup Group “Status.” See Table 9-2.

Table 9-2 lists the procedure for identifying the software version number.

Select
STATUS
Set Up Group

until you see:

STATUS

Lower Display

READ

Upper Display

Read the
software version

until you see:

Lower Display

Upper Display

VERSION

Software 
version 
Number

Please give this number to the Customer
Support person. It will indicate which version
of UDC 3300 you have and help them
determine a solution to your problem.