Lg Electronics RCRPS06GR 사용자 설명서

26

•   Make sure the remote is in the correct mode by pressing 

the corresponding device key

 (TV, SAT•CBL•STREAM, DVD, 

DVR•AUX1, VCR•AUX2, AUDIO)

. This tells the remote which 

device to operate.

•   Remove any obstacles between the remote and the device. Make 

sure you’re aiming the remote at the device’s IR sensor.

•   Make sure the batteries are fresh and are properly installed. 

Replace the batteries with two new AAA batteries, if necessary 
(see the Battery Installation section). 

•   If you are testing the remote while programming it, you may be 

too far away from the device or at a wrong angle. There must be 
an unobstructed path between the remote and the IR sensor on the 
device. Move closer and make sure you point the remote at the device 
you’re trying to control.

•   If you’re using the Direct Entry programming method to enter the 

codes for your brand and the unit is still not functioning properly, 
try the auto, brand, or manual search method.

•   To control combo units, like TV/VCRs or TV/DVDs, you must 

program the individual corresponding device keys to control each 
part of the combo unit. Once programmed successfully, the TV key 
controls the TV functions, and the DVD or 

VCR•AUX2

 key controls 

the DVD or VCR functions. 

•   Make sure the batteries are fresh and are properly installed.

•   Make sure the remote is in the correct mode by pressing 

the corresponding device key 

(TV, SAT•CBL•STREAM, DVD, 

DVR•AUX1, VCR•AUX2, AUDIO)

. This tells the remote which 

device to operate.

•   Make sure device is ready (for example, the DVD player has a disc 

loaded).

•   You may have pressed an invalid key for the mode the remote is 

in.

•   If you’re trying to enter a channel number directly, try pressing 

the OK / ENTER key after entering the channel number as this is a 
requirement of certain models and brands.

•   There is a possibility that a programmed code may only be able 

to control some of your device features (for example, only turns a 
device on and off). To confi rm that the device key is programmed 
with the correct code for maximum functionality, test the device. 
Attempt to control a variety of the device’s functions with the 
remote. If some of the features of your devices don’t work, try 
programming the remote with a different code in the list using 
the Direct Code Entry Method, until you fi nd the code that allows 
the remote to control the majority of your device’s functions. 
Different codes can provide different levels of functionality.

•   You may have pressed an invalid key for the mode the remote is 

in. 

•  Make sure the remote is in the correct mode by pressing 

the corresponding device key 

(TV, SAT•CBL•STREAM, DVD, 

DVR•AUX1, VCR•AUX2, AUDIO)

. This tells the remote which 

device to operate.

•   Make sure the batteries are fresh and are properly installed. 

Replace the batteries with two new AAA batteries, if necessary 
(see the Battery Installation section).