Lg Electronics RCRPS06GR 사용자 설명서
7
ENGLISH
NOTES: Test the remote with the device to make
sure the device key is programmed with the correct
code for maximum functionality. If some features
don’t work, try a different code in the list.
sure the device key is programmed with the correct
code for maximum functionality. If some features
don’t work, try a different code in the list.
Remember to enter the code for future reference in
the box provided in the Code Retrieval section of
this manual.
the box provided in the Code Retrieval section of
this manual.
If your brand isn’t listed in the code list, use one of
the Code Search methods to program the remote
control. (Refer to the Auto and Manual Code Search
methods.)
the Code Search methods to program the remote
control. (Refer to the Auto and Manual Code Search
methods.)
If you release the device key any time during the
Direct Code Entry procedure, the POWER key
blinks four times and the process is exited. The last
programmed code under the device key is retained.
Direct Code Entry procedure, the POWER key
blinks four times and the process is exited. The last
programmed code under the device key is retained.
Auto Code Search
The Auto Code Search goes automatically through
all the codes for the device you’re trying to control.
When you fi nd the one that operates your device,
you can stop the search and store that code.
all the codes for the device you’re trying to control.
When you fi nd the one that operates your device,
you can stop the search and store that code.
TIPS: Each device key is associated with a type
of device—the TV is preset to search for TVs,
SAT•CBL•STREAM for satellite receivers, digital
TV converters, cable boxes, and streaming media
players, DVD for DVD players, DVR•AUX1 for
DVRs, VCR•AUX2 for VCRs, and AUDIO for audio
receivers.
of device—the TV is preset to search for TVs,
SAT•CBL•STREAM for satellite receivers, digital
TV converters, cable boxes, and streaming media
players, DVD for DVD players, DVR•AUX1 for
DVRs, VCR•AUX2 for VCRs, and AUDIO for audio
receivers.
To program the DVR•AUX1 or VCR•AUX2 key for
a different type of device, see the Reassigning the
DVR•AUX1 or VCR•AUX2 Key section.
a different type of device, see the Reassigning the
DVR•AUX1 or VCR•AUX2 Key section.
To control combo devices, like TV/DVDs and TV/
VCRs, you need to program each key separately.
Each key will control that part of the combo device.
VCRs, you need to program each key separately.
Each key will control that part of the combo device.
If the original remote control that came with your
device has separate ON and OFF keys (instead of
a single POWER key), the Auto Code Search might
not work with that device. Try the Direct Code Entry
method described in this manual.
device has separate ON and OFF keys (instead of
a single POWER key), the Auto Code Search might
not work with that device. Try the Direct Code Entry
method described in this manual.
To exit without saving a new code at any point in
the Auto Code Search, press the EXIT•BACK key.
the Auto Code Search, press the EXIT•BACK key.
1.
Manually turn on the device
you want to control.
2.
Press and hold the device key you want to
program (the POWER key illuminates). While
you’re holding down the device key, use your
other hand to press and hold the remote’s
POWER key at the same time (the POWER key
turns off).
you’re holding down the device key, use your
other hand to press and hold the remote’s
POWER key at the same time (the POWER key
turns off).