Universal Remote Control URC-WR7 사용자 설명서
Page 26
STEP 2:
Press the VOLUME UP [VOL
] but-
ton and then press either the TV or AUDIO com-
ponent button that you want to use for volume.
The Component LED light will blink three times
to confirm that it is saved. This sets up three but-
tons (Volume Up, Volume Down and MUTE) as
a group for that component.
ponent button that you want to use for volume.
The Component LED light will blink three times
to confirm that it is saved. This sets up three but-
tons (Volume Up, Volume Down and MUTE) as
a group for that component.
Repeat Steps 1-2 for all other components.
Note:
SimpleSound is what’s technically
referred to as a “Punch Through” feature and is
not limited to volume control. It can also be
applied to other groups of buttons. If you find
yourself switching to a particular component
mode frequently to access a particular control,
consider using Punch Through.
not limited to volume control. It can also be
applied to other groups of buttons. If you find
yourself switching to a particular component
mode frequently to access a particular control,
consider using Punch Through.
VOLUME
UP