Nikon WR-1 사용자 설명서

While in pairing mode pairing is used to establish links between units 
before shooting begins (0 9), in ID mode units automatically link 
to others with the same name. Note that ID mode is available with 
WR-1 units only; pairing must be used to link with WR-R10/WR-T10 
wireless remote controllers.

Press the MENU button to display the menus. 
Highlight  LINK MODE and press 2, then 
highlight ID and press z to select ID mode.

Highlight  ID-NAME and press 2 to display 
the text-entry dialog shown at right.  Enter a 
name of up to eight characters using 4 or 2 
to position the cursor and 1 or 3 to enter 
characters; to choose the character type, use 
the group buttons (press A for the letters A–Z, B for the numbers 
0–9, and C for symbols).  Press z to proceed when entry is com-
plete.

The unit ID (body number) is used to diff eren-
tiate between receivers with the same name: 
each unit with the same name must have 
a unique unit ID. Highlight BODY NO. and 
press 2 to display the dialog shown at right. 
Choose a unit ID between 01 and 20 and press z.

Repeat Steps 1–3 to confi gure the remaining units, using the name 
selected in Step 2 and a unique unit ID for each unit.