Nikon WR-1 사용자 설명서

If wireless remote controllers fail to function as expected, check the 
list of common problems below before consulting your retailer or 
Nikon representative.

The unit does not turn on (no indicators appear in the display):

If the unit is not connected to a camera, confi rm that the batteries are 
inserted in the correct orientation (

0 4).  If the problem persists, replace 

the batteries with fresh batteries or with fully charged rechargeable bat-
teries.
If the unit is connected to a camera, confi rm that the cable is correctly 
connected and that the camera is on (

0 6).

The camera does not respond to the transmitter shutter-release button:

Confi rm that the receiver is on the same channel and in the same group 
as the transmitter (

0 8, 10).

If 

PAIRING is selected for LINK MODE, select PAIRING > LIST and confi rm 

that the transmitter is listed, indicating that the transmitter and receiver 
are paired.  If the transmitter is not listed, pair the devices as described 
on page 9.
If ID (supported with WR-1 units only) is selected for 

LINK MODE, con-

fi rm that all units have the same name (

0 23).

Confi rm that the receiver is connected to the camera (

0 6).

The shutter can not be released.  Check the camera.

The unit beeps twice and the camera shutter is not released:

The shutter can not be released.  Check the camera.
Check that the receivers do not share the same body number.

NOT DETECTED: No paired or linked units in the selected group can be de-
tected on the selected channel.

NO RESPONSE: Reattempt pairing after placing the units closer together and 
confi rming that they are on the same channel (

0 8, 9).

#00 IS DUPLICATED: The current unit ID (body number) is shared by other 
receivers with the same name. Select a unique unit ID (

0 23).

•

•

•

•

•

•
•

•
•