Universal Remote Control SL-7000 사용자 설명서

This feature can be used to program the remote control for more than one TV, VCR,
Satellite Receiver, etc. The three digit code for any device can be stored in any of the
DEVICE buttons. For example: For two VCRs, the first VCR can be stored in the VCR
DEVICE button under normal set up procedures, and the second VCR can be
programmed into the unused CATV or any other DEVICE  button.

Step 1: Turn on the device you wish to operate.
Step 2: On the remote control, press the DEVICE button you wish to assign this 

device to, and the MUTE button simultaneously.

Step 3: Press the DEVICE BUTTON that corresponds to the actual device you plan 

to operate.

Step 4: Select the three digit code number from the code list found  on pp. 

(15  30) for the device you will be operating

Step 5: Point the remote toward the device, and press in the three digit code

number.
Note:  SET # # # will appear in the LCD.

Step 6: The device will turn off when the correct three digit code number has been 

selected. Press the DEVICE button selected in Step 2. This will store the three 
digit code into that DEVICE button.
Note:   PASS will flash in the LCD.

Advanced Features 

(

Continued 

)