VXi VT1529A/B 사용자 설명서
Getting Started 23
Chapter 1
Getting Started
About this Chapter
This chapter will explain hardware configuration before installation in a
VXIbus mainframe. By attending to each of these configuration items, the
VT1422A won't have to be removed from its mainframe later. Chapter
contents include:
VXIbus mainframe. By attending to each of these configuration items, the
VT1422A won't have to be removed from its mainframe later. Chapter
contents include:
•
•
•
•
•
Configuring the VT1422A
There are several aspects to configuring the module before installing it in a
VXIbus mainframe. They are:
VXIbus mainframe. They are:
•
•
•
•
For most applications, only the Logical Address switch needs to be
changed prior to installation. The other settings can be used as delivered.
changed prior to installation. The other settings can be used as delivered.
Note
Setting the VXIbus Interrupt Level: The VT1422A uses a default VXIbus
interrupt level of 1. The default setting is made at power-on and after an
*RST command. The interrupt level can be changed by executing the
DIAGnostic:INTerrupt[:LINe] command in the application program.
interrupt level of 1. The default setting is made at power-on and after an
*RST command. The interrupt level can be changed by executing the
DIAGnostic:INTerrupt[:LINe] command in the application program.
Switch/Jumper
Setting
Logical Address Switch
208
Input Protect Jumper
Protected
Flash Memory Protect Jumper
PROG