VXi VT1529A/B 사용자 설명서

•

Notice that since there are only 502 CVT elements available for up to 512 

possible remote channel specifiers, these last 10 channels (15722-15731) must 
not be sent to the CVT or an error will be generated. Since the default data 
destination is to BOTH the FIFO and CVT (Data Destination 3), any reference 
in ROUT:SEQ:DEF to the last 10 remote channels must force the data 
destination to FIFO only.

•

*RST Condition: To supply the necessary time delay before Digital inputs 

are read, the analog input (AIN) scan list contains two entries for channel 0 (100). 
This minimum delay is maintained by replacing these default channels 
as others are defined by algorithms or ROUT:SEQ:DEF. The three other lists 
contain no channels.

•

Send with VXIplug&play Function: hpe1422_cmd(...)

Define mix of Remote and on-board channels. First 128 Remote channels 
default to FIFO and CVT, next 64 Remote channels are directed to FIFO only 
and last eight On-board channels default to FIFO and CVT.

ROUT:SEQ:DEF (@10000:10931,2(11600:11731),124:131)

returns the sequence of channels defined in 

the scan list.

•

The channel list contents and sequence are determined primarily by channel 

references in the ROUT:SEQ:DEF command and in any algorithms currently 
defined. The SENS:REF:CHANNELS and SENS:CHAN:SETTLING 
commands also effect the scan list contents. 

•

The <type> parameter selects which channel list will be queried:

"AIN" selects the Analog Input channel list (this is the Scan List).
"AOUT" selects the Analog Output channel list.
"DIN" selects the Digital Input channel list.
"DOUT" selects the Digital Output channel list.

"DEST" does not requesting the contents of a channel list type, rather it requests 
the Data Destination number for each channel in the "AIN" channel list. 

(string)

AIN | AOUT | DEST | DIN | DOUT

none