VXi VT1529A/B 사용자 설명서

Calibration

*CAL?

Calibrate

Performs internal calibration on all 64 channels out to the 

terminal module connector. Returns error codes or 0 for OK

Internal Operation

*IDN?

Identification

Returns the response: 

HEWLETT-PACKARD,E1422A,<serial#>,<driver rev#>

*RST

Reset

Resets all scan lists to zero length and stops scan triggering. 

Status registers and output queue are unchanged.

*TST?

Self-test

Performs self-test. Returns 0 to indicate test passed.

Status Reporting

*CLS

Clear Status

Clears all status event registers and so their status summary bits 

(except the MAV bit).

*ESE <mask>

Event Status Enable

Set Standard Event Status Enable register bits mask.

*ESE?

Event Status Enable query

Return current setting of Standard Event Status Enable register.

*ESR?

Event Status Register query

Return Standard Event Status Register contents.

*SRE <mask>

Service Request Enable

Set Service Request Enable register bit mask.

*SRE?

Service Request Enable query

Return current setting of the Service Request Enable register.

*STB?

Read Status Byte query

Return current Status Byte value.

Macros

*DMC <name>,<cmd_data>

Define Macro Command

Assigns one or a sequence of commands to a macro.

*EMC 1 | 0

Enable Macro Command

Enable/Disable defined macro commands.

*EMC?

Enable Macros query

Returns 1 for macros enabled, 0 for disabled.

*GMC? <name>

Get Macro query

Returns command sequence for named macro.

*LMC?

Learn Macro query

Returns comma-separated list of defined macro names

*PMC

Purge Macro Commands

Purges all macro commands

*RMC <name>

Remove Individual Macro

Removes named macro command.

Synchronization

*OPC

Operation Complete

Standard Event register's Operation Complete bit will be 1 when 

all pending device operations have been finished.

*OPC?

Operation Complete query

Places an ASCII 1 in the output queue when all pending 

operations have finished.

*TRG

Trigger

Triggers module when TRIG:SOUR is HOLD.

*WAI

Wait to Complete