VXi VT1529A/B 사용자 설명서

Below is an example VXIplug&play command sequence. Note that this is 
not executable; it has been simplified for easier reading. The C++ example 
source file (voltseq.cpp) is on the CD supplied with the instrument. 
View the readme.txt file provided with the VXIplug&play driver for 
example program file location.

Readings returned in voltage

Retrieve readings from

FIFO and/or CVT

Trigger event for each pass

through Scan List

Set up Trigger System to scan

strain bridge channels

Set up the analog input Scan List

Measure unstrained bridge output

voltages and retrieve from FIFO

Measure bridge excitation

voltages and retrieve from FIFO

Enable excitation voltage

to the strain bridges

Set bridge configuration switches

SENSe:STRain:BRIDge[:TYPE]

SENSe:STRain:EXCitation:STATe

MEASure:VOLTage:EXCitation?
SENS:DATA:FIFO:PART?

MEASure:VOLTage:UNSTrained?
SENSE:DATA:FIFO:PART?

ROUTe:SEQuence:DEFine

TRIG:SOURce, TRIG:COUNt, ARM:SOURce
TRIG:TIMer

Set up Sample Timer for best

channel-to-channel scan rate

Initiate Trigger System

SAMPle:TIMer

INITiate[:IMMediate]

TRIG[:IMM], *TRG (if TRIG:SOUR HOLD),
EXTernal trig, TTLTRGn signal, or TRIG:TIMer

SENSe:DATA:FIFO:..., SENSe:DATA:CVTable?

Set Input Filter on VT1529A/B

INPut:FILTer:FREQuency and INPut:FILTer:STATe

Post-process unstrained, excitation,

gage factor, and strained values

to calculate strain

SENSe:FUNCtion:VOLTage