Motorola DCT1800 사용자 설명서
Diagnostics B-9
DCT1800 Installation Manual
Field Description
SNR
Displays an estimate of the carrier signal-to-noise ratio. The SNR displayed is a
measure of the QAM cluster variance, which is proportional to the SNR.
measure of the QAM cluster variance, which is proportional to the SNR.
Analog channels display
analog
for carrier lock. The SNR displays a number for
the numeric value and blank for the ssss value.
The following variables can display:
Blank
The digital section is still in the initial state. If this occurs,
check diagnostic d07.
check diagnostic d07.
GOOD
Good value
FAIR
Marginal signal level
−
check the signal
POOR
Unusable signal
Modulation Mode
Indicates the modulation modes for analog and digital channels with the
following variables:
following variables:
Channels
Modulation Mode
Analog
channels Analog
Digital
channels QAM 64
QAM 256
Short Term Error Count
Indicates the FEC errors (maximum count of 65535) at 5-second intervals. The
Short Term Error Count is cleared after polling.
Short Term Error Count is cleared after polling.
Long Term Error Count
Indicates the accumulation of the Short Term Error Count (maximum count of
65535). The Long Term Error Count is cleared every 24 hours.
65535). The Long Term Error Count is cleared every 24 hours.
Tuned Frequency
Indicates the actual frequency the tuner is programmed (Carrier Definition
Frequency + 1.75 MHz).
Frequency + 1.75 MHz).