ResMed S8 Auto 25 사용자 설명서

7

Using the S8 Auto 25

En

gli

sh

 

Make sure the power is on.
The product name is displayed briefly on the LCD screen, then the standby (Ramp) 
screen appears. The key and LCD backlights also turn on.

Fit your mask as described in the mask user instructions.

A mask should not be used unless your S8 Auto 25 is turned on and operating 
properly. 

Alter the ramp time if required.

To start therapy, simply breathe into the mask or press 

. 

Lie down and arrange the air tubing so that it is free to move if you turn in your sleep.

After starting therapy, an introductory treatment screen will display: 

To stop treatment at any time, remove your mask and press 

. If your clinician 

has enabled SmartStart/Stop, simply remove your mask and treatment will end.

•

•

The S8 Auto 25

 

includes a mask-fitting feature to help you fit your mask properly. The 

mask-fitting feature delivers air pressure for a three-minute period, prior to starting 
treatment, for checking and adjusting your mask fit to minimise leaks. 
To use the mask-fitting feature:

Fit your mask as described in the mask user instructions.

Hold down 

 for at least three seconds until air pressure delivery starts and 

the following screen appears:

LK: 10L/min    RR: 15
MV: 10.2       VT: 680

VA:SETL       4.0-10.0

A>>>>       

 

  PS   6.0 

S**TiMn        TiMx 2.0
Ti 1.5s             1:  1.6

SpO2: 98%
HR : 60                exit

This screen only displays if 
ResLink and an oximeter are 
connected

Inspiration information

Leak and breath information

Mode and pressure display

VAuto 
mode 
example

Mask-fit star rating

MASK FIT: 

 

excelnt  

       

*****