ResMed S8 Auto 25 사용자 설명서
3
Using the S8 Auto 25
En
gli
sh
Using the S8 Auto
25
Setting up your S8
1
Connect the power cord to the socket at the rear of your S8 Auto 25.
2
Plug the other end of the power cord into the power outlet.
3
Connect one end of the air tubing firmly onto the air outlet.
4
Connect the assembled mask system to the free end of air tubing.
For information on assembling your mask, see your mask manual.
For information on assembling your mask, see your mask manual.
!
WARNING
•
Make sure the power cord and plug are in good condition and the
equipment is not damaged.
equipment is not damaged.
•
Only ResMed air tubing should be used with the device. A different type of
air tubing may alter the pressure you actually receive, reducing the
effectiveness of your treatment.
air tubing may alter the pressure you actually receive, reducing the
effectiveness of your treatment.
•
Blocking the hose and/or air inlet of the device while in operation could lead
to overheating of the device.
to overheating of the device.
!
CAUTION
•
Be careful not to place the device where it can be bumped or where
someone is likely to trip over the power cord.
someone is likely to trip over the power cord.
•
If you put the device on the floor, make sure the area is free from dust and
clear of bedding, clothes or other objects that could block the air inlet.
clear of bedding, clothes or other objects that could block the air inlet.
1
2
3
4