Optimus 27 사용자 설명서

18

To watch broadcast TV on a standard TV
connected to the VCP, simply press

 to turn off the VCP, then tune to

the desired station on the TV.

If you connected a VCR to the VCP, you
can use your VCP to play back a video
cassette tape while the VCR records it.

Follow these steps to copy a video cas-
sette tape.

1. Load a pre-recorded tape into the

VCP.

2. Load a blank video cassette, or one

you want to record over, into the
VCR.

3. If the VCR has an input select

switch, set it to the video setting.

Note: If the VCR does not have an
input select switch and you later
want to record VHF/UHF/cable
channels on the VCR, you might
need to disconnect the VCP from
the VCR’s audio/video input jacks.

4. Select the desired recording speed

on the VCR.

5. Begin recording on the VCR.

6. Press 

 on the VCP to begin

tape playback.

7. To watch the tape while you copy it,

turn on the TV/monitor. If you are
using a standard TV, tune it to the
same channel (3 or 4) to which you
set the VCP’s 

 switch. If

you are using a TV monitor, switch it
to the video setting.

16-419.fm  Page 18  Tuesday, July 20, 1999  11:16 AM