Optimus 114 (16-551) 사용자 설명서

33

You can select the signal to record  — from the
source connected to the 

 jack or an

audio/video source — in either of these ways.

• Repeatedly press 

 until the desired

input source appears —  

 (or

) for an audio/video source, or a

channel number for broadcast signals.

• Repeatedly press 

 s or t to set the VCR

to the desired broadcast channel, or to one
channel higher than the highest channel
number (or one channel lower than the
lowest channel number) for an audio/video
source.

Note: Select 

 for recording signals from

the back 

 jacks, or

 for recording signals from the front 

jacks.

The Model 63 has three channels for audio re-
cording  — two (left and right) stereo channels
on the Hi-Fi track, and one monaural channel
on the standard track.

Press 

 to display the audio programs

available on the broadcast you are currently
tuned to. 

, 

, and 

 appear on

the TV screen, and STEREO and/or SAP might
appear on the VCR’s display. On the TV
screen, parenthesis appear around each type
of audio signal that is not available. For exam-
ple, if a station broadcasts mono (monaural)
and SAP signals, 

, 

, and 

appear on the TV screen and SAP appears on
the VCR’s display.

The arrow to the right of the audio mode display
indicates the current audio mode. To select the

audio mode when the broadcast has a stereo or
SAP signal, repeatedly press 

 until the

arrow mark points to the desired mode.

Follow these steps to record a program as you
watch it. If you know how long the program is,
you can set how long the VCR records so it
stops recording automatically.

Note: If you are watching the program on a TV/
monitor that is connected to the VCR’s 

 jacks, set the TV/monitor

to the video mode and skip Steps 2 and 3.

1. Turn on the VCR and the TV.

2. Set the TV’s tuner to the same channel as

 on the back of the VCR.

3. Press 

 until VCR appears.

4. Load a blank cassette, or one that you

want to record over, into the VCR.

5. Repeatedly press 

 on the remote

control until the desired recording speed
(

, 

, or 

) appears.

6. Select the signal to record (see “Selecting

the Signal to Record”).

7. (Model 63 only) Set the audio recording

mode to the desired setting. See “Receiv-
ing/Recording Stereo/SAP Broadcasts
(Model 63 Only)”.

8. Press 

. The VCR starts to record

and the following appears on the TV
screen:

TO  SET  SPEC I F I C  REC  T I ME
PLEASE  PUSH  REC  KEY

  REC                        02

16-551.fm  Page 33  Tuesday, July 20, 1999  5:13 PM