Optimus 114 (16-551) 사용자 설명서
38
Notes:
• The VCR can record only one broadcast at
a time. If you set the VCR’s timer to record
broadcasts on different channels that start
at the same time, the VCR only records the
broadcast that has the lowest timer num-
ber (see “Checking/Changing Timers” on
Page 40).
broadcasts on different channels that start
at the same time, the VCR only records the
broadcast that has the lowest timer num-
ber (see “Checking/Changing Timers” on
Page 40).
• If two timer settings overlap, the one that
starts first has priority. The VCR begins
recording the second broadcast after the
set time for the first broadcast is over.
recording the second broadcast after the
set time for the first broadcast is over.
• The VCR must be off at the start time you
set for it to begin an automatic timer
recording.
recording.
• If there is a power failure of more than 30
minutes during a timer recording, the
recording does not resume after power is
restored.
recording does not resume after power is
restored.
• If there is a power failure of more than 30
minutes before a start time, the VCR loses
the clock setting and therefore does not
start automatic timer recording. However, if
you have an EDS channel in your area and
have set the VCR to automatically set the
clock from the EDS signal, the clock is
reset within 10 minutes after power is
restored and you turn on the VCR, and the
VCR records at the set time(s).
the clock setting and therefore does not
start automatic timer recording. However, if
you have an EDS channel in your area and
have set the VCR to automatically set the
clock from the EDS signal, the clock is
reset within 10 minutes after power is
restored and you turn on the VCR, and the
VCR records at the set time(s).
Setting a Timer
Note: If you use a TV/monitor that is connected
to the VCR’s
to the VCR’s
R-AUDIO-L/VIDEO OUT
jacks, set
the TV/monitor to the video mode and skip
Steps 2 and 3.
Steps 2 and 3.
1. Turn on the VCR and the TV.
2. Set the TV to the same channel as
3 CH. 4
on the back of the VCR.
3. Repeatedly press
TV/VCR
until VCR
appears.
4. (Model 63 only) Set the audio recording
mode to the desired setting. See “Receiv-
ing/Recording Stereo/SAP Broadcasts
(Model 63 Only)” on Page 33.
ing/Recording Stereo/SAP Broadcasts
(Model 63 Only)” on Page 33.
5. Load a blank cassette, or one that you
want to record over, into the VCR.
6. Press
PROG
. You see:
7. Repeatedly press
PLAY
or
STOP
to select
TIMER
PROGRAM
, then press
FF
. The cur-
rent settings for up to the first four broad-
casts appear.
casts appear.
Note: If the clock is not set,
PLEASE
SET
CLOCK
BEFORE
PROGRAMMING
appears,
then the clock setting screen appears. Set
the clock as described in “Manually Setting
the Clock” on Page 16, then continue with
Step 8.
the clock as described in “Manually Setting
the Clock” on Page 16, then continue with
Step 8.
8. Repeatedly press or hold down
PLAY
or
STOP
to select an empty timer number,
then press
FF
. The following menu
appears.
9. Repeatedly press or hold down
PLAY
or
STOP
to select the date when you want to
record.
RAM
OGRAM
AM
Y
2 : 00 A 08
SP
STOP CH SPD
SELE CT START DATE
DATE
START
STOP
CH
EP
SET : KEY
SELECT : KEY
END : PROG KEY
TODAY
8 SAT --:-- --:-- --
16-551.fm Page 38 Tuesday, July 20, 1999 5:13 PM