Optimus 109 사용자 설명서
12
Using the TV’s
Single VHF/UHF F-Connector
Single VHF/UHF F-Connector
1. If your antenna has 75-ohm cable, connect
the antenna cable directly to the VCR’s
VHF/UHF CATV IN
input terminal.
If your antenna has 300-ohm lead-in wire,
you need to first convert it to a 75-ohm
cable by connecting a 300-to-75-ohm
matching transformer (such as Cat. No.
15-1253, not supplied) following these
steps.
you need to first convert it to a 75-ohm
cable by connecting a 300-to-75-ohm
matching transformer (such as Cat. No.
15-1253, not supplied) following these
steps.
a. Connect the antenna’s lead-in wire to
the transformer’s 300-ohm input termi-
nal screws.
nal screws.
b. Connect the transformer’s 75-ohm out-
put F-connector to the VCR’s
VHF/UHF
CATV IN
input F-connector.
2. Use the supplied 75-ohm cable to connect
the VCR’s
VHF/UHF CATV OUT
F-connector
to your TV’s VHF/UHF antenna input F-
connector.
connector.
Using the TV’s
Single VHF F-Connector and
Double Screw UHF Screw Terminals
Single VHF F-Connector and
Double Screw UHF Screw Terminals
If your TV has a single VHF F-connector and
double UHF screw terminals and your antenna
is not VHF-only (channels 2–13) or UHF-only
(channels 14–69), you need a band splitter
(such as Cat. No. 15-1231, not supplied) to
connect your VCR to the separate VHF and
UHF terminals.
double UHF screw terminals and your antenna
is not VHF-only (channels 2–13) or UHF-only
(channels 14–69), you need a band splitter
(such as Cat. No. 15-1231, not supplied) to
connect your VCR to the separate VHF and
UHF terminals.
1. If your antenna has 75-ohm cable, connect
the antenna cable directly to the VCR’s
VHF/UHF CATV IN
input terminal.
75-Ohm Cable
300-Ohm Lead-In Wire
300-to-75-Ohm
Matching Transformer
Matching Transformer
VHF/UHF
UHF
VHF
75-Ohm Cable
VHF/UHF
75-Ohm Cable
75-Ohm Cable
16-546.fm Page 12 Tuesday, July 20, 1999 4:25 PM