Toshiba RD-XV48DTKF 사용자 설명서

20

EN

Connect the unit to a TV after considering the 
capabilities of your existing equipment.

Connect the antenna or cable to the 
ANTENNA IN jack of this unit.

Connect the ANTENNA OUT jack of 
this unit to the Aerial jack of your TV. 
Use the supplied RF cable.

Connect AV1 (TV) Scart socket of 
this unit to the Scart socket of your 
TV. Use a commercially available 
Scart cable.

• If your TV does not have a Scart socket, use a 

commercially available Scart adaptor or Scart/RCA 
cable to connect.

• Connect this unit directly to the TV. If the AV cables 

are connected to a VCR, pictures may be distorted 
due to the copy protection system.

• When changing the “Video Out” setting 

(“SCART (RGB)”, “Component (Interlace)” or 
“Component (Progressive)”), connect to the 
corresponding jack on the TV. If the setting is 
changed, for example, to “Component (Interlace)” or 
“Component (Progressive)” while the scart cable is 
connected to the TV, a distorted video signal may be 
output.

Using the COMPONENT VIDEO OUT jacks 
and the AUDIO OUT (L

If your TV has Component Video input jacks, use a 
Component Video cable and an Audio cable (to 
connect the AUDIO OUT (L

\R) jacks).

• Component connection provides the better quality 

picture.

Connect the COMPONENT VIDEO 
OUT jacks of this unit to the 
Component Video input jacks of your 
TV. Use a commercially available 
Component video cable.

\R) jacks 

• After you have made the connections, set the “Video 

Out” setting. (See page 90.)

Audio/Video cable (not supplied)

Scart/RCA cable 
(not supplied)

Scart adaptor 
(not supplied)

Scart cable (not supplied)

RCA cable 
(supplied)

To Aerial jack

Antenna

Cable 

Signal

RCA cable 
(not supplied)

or

Component 

Video IN

AUDIO IN

Audio cable

(not supplied)

Component

Video Cable

(not supplied)

E3NG0FD_EN.book  Page 20  Wednesday, January 30, 2008  10:37 AM