Sony SLV-SE730B 사용자 설명서

45

Recording TV programmes using the Dial Timer (SLV-SE830B only)

• To cancel a Dial Timer setting, press 

x

 (stop) on the VCR while you are making 

the setting.

• The programme is recorded in the current tape speed mode.  To change the tape 

speed, press SP/LP before you complete the setting in step 9.

• To check, change, or cancel the programme setting, see “Checking/changing/

• If eight programmes have already been set using the ShowView system or the 

MINUTERIE menu, “FULL” appears in the display window for about five 
seconds.

• The 

 indicator flashes in the display window when you complete the setting in 

step 9 with no tape inserted.

• If you set the clock using the Auto Clock Set function and HORLOGE AUTO is 

set to OUI, the clock will adjust itself to the incoming time signal regardless of 
adjustments made with the Dial Timer.  Be sure you have set the Auto Clock Set 
correctly.

• When the time is set incorrectly, “ERROR” appears in the display window in step 

9.  Set the timer again from step 1.

• You cannot set the tape speed to AUTO using the Dial Timer.  To select AUTO, set 

the tape speed in the MINUTERIE menu (see page 57).

Hold down 

 PROG so that “DAY” appears in the display window.  

However, if the clock has already been set, the current setting appears.

Turn 

 PROG to set the day.

Press  

PROG.

“MONTH” appears in the display window.

Turn and press 

 PROG to set the month, and then the year.  

After you set the year, “CLOCK” appears in the display window again.

Turn and press 

 PROG to set the hour and minute.

When you have finished setting the time, press 

 PROG to start the 

clock.