JVC SR-V10E 사용자 설명서
Masterpage:Left-FullCol
46
EN
Filename [SR-V10E4-EN.fm]
Page 46
August 8, 2002 5:41 pm
SUBSIDIARY SETTINGS (cont.)
* The default setting is bold in the table below.
8
O.S.D. (PLAY)
ON
OFF
OFF
When this function is set to “ON”, various operational indicators appear on the TV
screen.
screen.
NOTES:
● When you use this recorder as the source player for editing, be sure to set “O.S.D. (PLAY)” to
“OFF” before starting.
● During playback, the operation mode indicators may be disturbed depending on the type of
tape being used.
8
PROG. NAVIGATION
ON
OFF
OFF
When this function is set to “ON”, the recorder stores information on the recorded
programmes. If you do not want to use the Programme Navigation function (
programmes. If you do not want to use the Programme Navigation function (
墌
pg. 36),
set “PROG. NAVIGATION” to “OFF”.
NOTES:
● Programme Navigation is possible with the cassettes recorded with this recorder only.
● Before recording, make sure the recorder’s clock is set correctly.
● To record the programme information in this recorder’s memory, you must continue to record
each programme for over the minimum recording time; 8 minutes for the SP mode, 15 minutes
for the LP mode or 23 minutes for the EP mode.
for the LP mode or 23 minutes for the EP mode.
● Programme Navigation may not work properly depending on the tape being used.
● The programme information is stored in this recorder’s memory. If the memory in this recorder
should ever be damaged and the programme information lost, it is impossible to restore that
information.
information.
8
AUTO SP
]
LP TIMER
ON
OFF
OFF
When this function is set to “ON”, the recorder automatically switches to LP mode to
allow complete recording if there is not enough tape to record the entire programme
while timer-recording in SP mode.
For Example . . .
Recording a programme of 210 minutes in length onto a 180-minute tape
allow complete recording if there is not enough tape to record the entire programme
while timer-recording in SP mode.
For Example . . .
Recording a programme of 210 minutes in length onto a 180-minute tape
Make sure you set this function to “ON”, before the timer-recording starts.
NOTES:
● If you have programmed the recorder to timer-record 2 or more programmes, the second
programme and those thereafter may not fit on the tape if you set “AUTO SP
]
LP TIMER” to
“ON”. In this case, make sure the mode is not engaged, then set the tape speed manually
during timer programming.
during timer programming.
● In order to ensure that the recording fits on the tape, this feature may leave a slight
non-recorded section at the end of the tape.
● There may be some noise and sound disturbance at the point on the tape where the recorder
switches from SP to LP mode.
● The Auto SP
]
LP Timer feature will not work properly with any tapes longer than E-180, or with
some tapes of shorter lengths.
● If you perform timer recording with both VPS/PDC and the Auto SP
]
LP Timer activated, and
the programme goes beyond its originally scheduled length, there may be times when the
programme cannot be recorded in its entirety.
programme cannot be recorded in its entirety.
Total 210 minutes
Approximately 150 minutes
Approximately 60 minutes
SP mode
LP mode
SR-V10E1-EN.book Page 46 Monday, August 19, 2002 10:20 AM