JVC HR-S6955EK 사용자 설명서

advanced features

The VCR needs to find, identify and memorise all available stations in your area in order to
record programmes correctly. Once done, pressing the PR + or - buttons enables you to jump
to the available channels without going via any vacant channels. This channel search can be
done either automatically or manually. You should only need to perform either of the
following procedures if Auto Setup has failed to identify and record available channels or
you have moved to a new area.

Auto Channel Setup

  Press m.

  Move the highlight bar to 

AUTO CH

SET

 using the A and B buttons and press 

OK

3

/

 (or E).

  If you have chosen to connect the

VCR to the TV with both the RF Cable and a 21-pin SCART Cable
(not provided) and the TV set is in its AV mode (see the TV
manual), the 

AUTO SET

 screen will appear on the TV and remains

there for about 4–12 minutes while the VCR searches for receivable
stations. During Auto Channel Set the S mark on the screen moves
from left to right.

The caption 

SCAN COMPLETED

 appears at the end of the process for

about 5 seconds.

  Once

Auto Channel Set has completed

its search, the confirmation screen will appear showing the details
(

PR

 = Preset Number, 

CH

 = Channel Number and 

ID

 = Station

Name) of the TV stations that the process has found. The first
station will have a highlight bar over it and will be blinking. This
screen and the programme currently being broadcast on the
selected station will alternate at 8 second intervals. To view the
next channel, press the A and B buttons to move the
highlight bar to the required channel.

  Press m.

  In certain reception conditions, station names may not be stored

correctly by the VCR and Auto Guide Program Number Set may not work properly. If  the Guide
Program Numbers are not set, entering a PlusCode number, may result in an incorrect channel
being recorded.

  The VCR memorises all stations found regardless of their quality. If a station’s

quality is poor, you can delete that station from the memory (see page 49).

[10]
a

 k: EDIT

a

 [x]: DELETE

[1] a k
[MENU]: EXIT

F

  HR-S6955EK-EN/p47-52

3/13/02, 05:09 PM

47