JVC LPT0616-001A 사용자 설명서
Filename [DVS3EU_1a-EN.fm]
Masterpage:Left
26
EN
Page 26
October 8, 2001 2:37 pm
PLAYBACK/RECORDING ON VHS DECK (cont.)
Recording Features
(VHS deck)
Record One Programme While
Watching Another
Watching Another
Once recording is in progress, all you need to do is to set
the channel controls on the TV for the station you wish to
view.
the channel controls on the TV for the station you wish to
view.
● The programme selected with the TV’s channel controls
appears on the TV screen, while the one selected with the
recorder’s PR buttons is recorded on the tape.
recorder’s PR buttons is recorded on the tape.
● If a decoder is connected to the recorder (
墌
pg. 66), you can
select a scrambled channel as well with the TV channel
controls.
controls.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
1
Start recording.
Press
7 on the recorder.
2
Engage the ITR mode.
Press
7 again. “o” blinks and “0:30” appears on the front
display panel.
3
Set the recording duration.
If you want to record for more than 30 minutes, press
7
to extend the time. Each press extends recording time by
30 minutes.
30 minutes.
NOTES:
● You can only perform ITR using the
7
button on the recorder’s
front panel.
● You can play back a tape on DV deck while using the VHS
deck for Instant Timer Recording. However, remember that the
recorder will turn itself off when the Instant Timer Recording
ends.
recorder will turn itself off when the Instant Timer Recording
ends.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (in the right column) or timer recording
(
Recording (in the right column) or timer recording
(
墌
pg. 36, 38, 40), the recording will resume automatically
when power is restored to the recorder unless the recorder’s
memory backup has expired.
memory backup has expired.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
1
3
2
Record safety tab
DVS3EU_1a-EN.fm Page 26 Monday, October 8, 2001 2:44 PM