JVC HR-S5700AM 사용자 설명서

1

2

3

4

5

6

7

8

9

0

1

2

4

You can use a camcorder as the source player and your video
recorder as the recorder.

MAKE CONNECTIONS

 A

If the camcorder has no S-VIDEO output connector...
... connect the camcorder's AUDIO/VIDEO OUT
connectors to the recorder's front panel AUDIO/
VIDEO input connectors.

 B

If the camcorder has an S-VIDEO output connector...
... connect the camcorder's S-VIDEO OUT and
AUDIO OUT connectors to the recorder's front
panel S-VIDEO(S-2) and AUDIO input connectors.
The recorder's rear panel S-VIDEO IN and AUDIO
IN input connectors are also available.

● When using a monaural camcorder, connect its

AUDIO OUT connector to the AUDIO L input
connector on your recorder.

● When a Master Edit Control-equipped JVC camcorder

is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder's instruction manual
for operating procedure.

SET RECORDER'S INPUT MODE

Press NUMBER key "0" and/or PR +/– to select "F-1"
for the AUDIO/VIDEO input connectors, or "S-2" for the
AUDIO/S-VIDEO input connectors, depending on the
connectors being used.

SELECT "EDIT" FOR PICTURE

CONTROL SET MODE

Follow the "Picture Control" section on page 15, then
select "EDIT."

START CAMCORDER

Engage its Play mode.

START RECORDER

Engage its Record mode.

PR+

PR–

Mini-Plug Cable
(not provided)
(JVC camcorder
only)

VIDEO OUT

EDIT

Camcorder

VIDEO
input

To rear panel PAUSE
connector

AUDIO OUT

Audio/Video Cable
(not provided)

AUDIO
input

PR+

PR–

Mini-Plug Cable
(not provided)
(JVC camcorder
only)

S-VIDEO OUT

EDIT

Camcorder

S-VIDEO
(S-2)
input

To rear panel PAUSE
connector

AUDIO OUT

Audio Cable (not provided)

AUDIO
input

S-Video Cable (provided)

● All necessary cables can be obtained from your dealer.

● You can also use another video recorder as the player instead

of a camcorder.

● When you select "EDIT" to dub tapes, be sure to select

"AUTO" (or "NORM" when the B.E.S.T. function is set to
"OFF") after you finish dubbing the tapes (

 pg. 15).

● To edit, both the player and the recorder must be of the

same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.

● PAL, SECAM and NTSC camcorders can be used as a

player for editing.

● For more information on multi-system compatibility,

 pg. 44.