GE VG2053/VG4053 사용자 설명서

• Tape already rewound. 

• Cable box was not turned on at time recording was to begin.
• Program entered incorrectly (wrong channel or times).
• Power interruption.  Reset clock.  See page 9.
• Check to see if time and date are correct — including 

AM/PM

.

• Program exceeded tape’s length or tape was not rewound beforehand.
• VCR was not turned off at the time recording was to start.
• No tape in VCR or cassette’s safety tab broken off.

• Power interruption.  Clock on the front panel will show - -:- -.
• Clock was not set accurately (check 

AM/PM

and date).  See page 9.

• Time counter display appears in the VCR’s display panel.

• VCR is removing tape from heads.  This is normal.  The head cylinder inside

the VCR continues to rotate for a few minutes after you put the VCR in the
stop mode.

• Check antenna connections.
• Check 

SIGNAL:CABLE/ANTENNA

feature.  

• Channels must be placed in memory using 

AUTO CHANNEL SEARCH

feature before channels can be added or removed from channel memory.  
See page 8.

• Cable channels over 69 can only be selected if 

SIGNAL:CABLE/ANTENNA

feature is set to 

CABLE

.  Details are on page 8.

• Press  

PLAY

to return to normal playback.

• Timer recording programmed and no cassette in VCR.