JVC hr-dvs3u 사용자 설명서
48
EN
TIMER RECORDING (cont.)
24HR Quick
Programing
Programing
You can program a timer recording that starts within 24
hours using the ADVANCED JOG dial on the VCR.
hours using the ADVANCED JOG dial on the VCR.
A
Enter the program mode.
Press 24HR QUICK PROGRAM on the VCR. The start
time indicator (
time indicator (
) starts blinking on the front display
panel.
B
Set the program start/stop time and
channel.
channel.
Turn the ADVANCED JOG dial to the left or right to set
the time you want recording to start.
the time you want recording to start.
● One click stop of the ADVANCED JOG dial changes the time
in 5-minute intervals.
Push the ADVANCED JOG dial. The stop time indicator
(
(
) starts blinking on the front display panel. Turn the
ADVANCED JOG dial to the left or right to set the time
you want recording to stop.
you want recording to stop.
Push the ADVANCED JOG dial. Turn the ADVANCED
JOG dial to the left or right to select the channel you wish
to record.
JOG dial to the left or right to select the channel you wish
to record.
● You can cancel the setting at any time by pressing and holding
the ADVANCED JOG dial for more than 3 seconds or pressing
CANCEL on the Remote. Repeat the step 2.
CANCEL on the Remote. Repeat the step 2.
C
Engage the VCR’s timer mode.
Press 24HR QUICK PROGRAM. The VCR turns off
automatically and “
automatically and “
#
” appears on the front display
panel.
● To disengage the timer mode, press TIMER or 24HR QUICK
PROGRAM again.
Before performing the 24HR Quick Programing:
● Make sure that the VCR’s built-in clock is set properly.
● Select the deck.
● Set the tape speed.
● For the VHS deck:
Insert a VHS (or S-VHS) cassette with the record safety tab
intact.
For the DV deck:
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
intact.
For the DV deck:
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
1
3
2