A&D UC-321PBT-C 사용자 설명서
9
Transmitting Data to a Continua Manager
Measurement results will be automatically transmitted to the paired Manager at
each measurement. In the case of unsuccessful transmission, the device stores
the last 25 measurements in memory. The device will send all of the data at the
next successful connection and clear memory.
each measurement. In the case of unsuccessful transmission, the device stores
the last 25 measurements in memory. The device will send all of the data at the
next successful connection and clear memory.
Before Requesting Service
Problems Corrective
Action
Nothing is displayed by pressing the
measurement switch.
measurement switch.
Check the battery installation.
Replace all four batteries with new ones.
Replace all four batteries with new ones.
“88888” remains displayed.
“e- 0” is displayed.
The difference between an estimated
weight and a measured weight is
excessive.
“e- 0” is displayed.
The difference between an estimated
weight and a measured weight is
excessive.
Remove and reinstall the batteries.
Place the scale on a solid level surface.
Remove any foreign objects that might
be touching the bottom of the scale.
When the scale is placed on a carpet, be
sure that the add-on feet are attached or
try moving the scale to a level surface
such as tile or wood.
Place the scale on a solid level surface.
Remove any foreign objects that might
be touching the bottom of the scale.
When the scale is placed on a carpet, be
sure that the add-on feet are attached or
try moving the scale to a level surface
such as tile or wood.
is displayed.
Replace all four batteries with new ones.
If you can not locate and fix the problem, contact your supplier, or the A&D service
group. The A&D service group will support authorized suppliers with technical
information, spare parts and units.
group. The A&D service group will support authorized suppliers with technical
information, spare parts and units.