Toshiba SL-9000-LSB SERIES 사용자 설명서
11-22
11. PROGRAMMING PROCEDURES
11.14 LON SYSTEM
11.14 LON SYSTEM
Menu Group: 2
Item No.:
4
The SL-9000 scales which consist of a master, satellites, and a backup master are connected
each other by the LON cable to transmit data such as PLU, ING., NUTRI, etc.
each other by the LON cable to transmit data such as PLU, ING., NUTRI, etc.
ID# 1 is reserved for the master terminal.
ID# 2 is reserved for the backup master terminal or satellite terminal.
ID# 3 to 32 are for satellite terminals.
Setting numbers other than the above results in an error.
NOTES: 1. Before starting the above procedure, press the
key and enter IN-LINE mode.
2. When installing the backup master terminal, set the master scale’s initial status of #9-1 to
1.
3. Set ID # to all scales connected by LON cable.
4. When the display power is turned on, a satellite terminal is ready to receive data from
4. When the display power is turned on, a satellite terminal is ready to receive data from
the master terminal.
5. After setting the ID #, turn the power switch OFF and ON again.
CHANGE
PLU
PROG.
ESC.
<MENU>
Group 2
Main
<MENU>
m
m
ENTER
ENTER
IN-LINE OFF-LINE
4
<MENU>
Group 2
ID #
DLL?
Yes
No
Set the number of
scales in the system.
ID#: 1
n
p