HoMedics Body Fat Monitor 사용자 설명서

6.  Step on the scale with bare feet. Stand still while the unit measures your weight. 

The weight will display for 2 seconds. 

7.  Then it starts to measure body fat. The measurement pattern will be shown on the 

display during BFA measurement. 

8.  The BFA measurement finishes with 1 long beep. The fat percentage, age, and 

sex will be shown on the display, toggling in 1 second intervals. The unit will turn off 
automatically after 10 seconds.

1.  Follow steps 1-4 in To Recall Memory.
2.  If the selected memory is occupied, press both (▲)/(▼) at the same time to clear the 

content of the selected Memory. 

1.  Ideal body fat content is not the same for all people. Age, sex, and height are 

variables in this measurement. The Homedics “Body Fat Display Graph” will show your 
general condition. Consult your physician to determine what is most ideal for you.

2.  It is recommended to measure body fat or weight at the same time period daily.
3.  Use this product without clothing for best accuracy. Clothes can vary in weight 

and affect the percentage calculation.

4.  Feet must be bare and clean. For best readings they should also be slightly moist.

8.   If the product is not used after entering BFA (Body Fat Analyzer) mode, it will 

automatically turn off in 10 seconds.

9.   The “Body Fat Display Graph” at the bottom of the screen will show your general 

condition. See “General Information About Body Fat” for Recommended Body 
Fat Levels.

This product features 10 personal memory settings, allowing users to store height, age, and
gender for frequent use.

1.   Follow steps 1-5 in Body Fat Measuring Operation.
2.   Press (▲)/(▼) to select the memory location (0-9) and the memory number will 

be blinking. 

3.  If the selected memory location is occupied, it will display “         “ next to the memory 

number. If unoccupied, the bar will not be displayed. 

4.   Press (MODE) to store the BFA setting into the desired memory location with 

1 long beep.

1.  Press and hold (ON) button for 2 seconds while the power is off. It will now enter 

recall mode.

2.  In Recall mode, it will flash the memory number on LCD for 1 second. The height, 

age and gender of the memory number will be displayed on the screen.

3.  Press (▲)/(▼) to select the memory number. 
4.  If the selected memory number is unoccupied, no previous input will be displayed.
5.  If the selected memory number is occupied, press (MODE) to confirm the desired 

memory settings with 1 long beep.

M

'

20-29 yrs.

14%

20%

30-39 yrs.

15%

21%

40-49 yrs.

17%

22%

50-59 yrs.

18%

23%

60+ yrs.

19%

24%

M

%

LB