Festool PI574422 사용자 설명서

Supplemental Owner’s Manual 

7

Congratulations on your purchase of a new Festool Domino 

Tenon Joiner. The Domino joiner is the finest portable loose 

tenon joiner in the world. Before using your new Domino 

joiner, make sure you fully read and understand all of 

the precautions and safety information presented in this 

manual. 

 WARNING! To reduce the risk of injury from contact 

with a moving part, always unplug the joiner before 

making any inspections or adjustments, or before 

installing or removing any accessory!

1.  With the joiner unplugged, inspect the mortising bit. 

Make sure it is not bent, chipped, or otherwise damaged, 

and make sure the bit is fully tightened on the spindle. 

(Refer to “

more information).

 CAUTION! Check regularly whether the mortising 

bit is in good condition. Mortising bits that are bent 

or damaged can break, and should no longer be 

used.

2.  Peel off the protective film from the bottom of the joiner 

baseplate. 

3.  Set up the joiner for the appropriate type of operation as 

described throughout the remainder of this section.

4.  Make sure that the fence height and angle locking levers 

are properly tightened. 

Protective 

Film

5.  Install the power cord into the Plug-It receptacle on the 

joiner (refer to 

6.  Before you use the joiner, make sure to read the 

Some joints require the fence to be set to an angle from the 

mortising bit. The most common application is for making a 

1.  Unplug the joiner for safety.
2.  Loosen the fence angle locking lever by rotating it coun-

terclockwise about ¼-turn.

3.  Rotate the fence face to the desired angle, and tighten 

the locking lever.

 

►

The fence has detent stops at 22½, 45, 67½, and 90 

degrees.

 

►

Use the gauge pointer for setting the fence to angles other 

than the ones listed above.

 

►

For greater stability, the locking lever clamps down on 

both right and left sides of the fence.

The table below provides some common miter angles for 

easy reference.

3 – Triangle

60

30

4 – Square

45

45

5 – Pentagon

36

54

6 – Hexagon

30

60

7 – Heptagon

25.7

64.3

8 – Octagon

22.5

67.5

Locking 

Lever

G

auge 

Pointer

Detent 

Stops

Fence

  Hint: If the position of the locking lever interferes 

with your operation, you can rotate the lever after it 

has been tightened by slightly pulling the lever out 

and rotating it to a different position. 

ew Text