Siemens MC55 사용자 설명서

MC55 AT Command Set

10.8 AT+CGQMIN

obile

MC55_ATC_V01.05

Page 256 of 469

2/10/04

Confidential / Released

10.8

AT+CGQMIN Quality of Service Profile (Minimum acceptable)

Syntax

Command Description

The test command returns values supported as a compound value. If the MT supports several PDP types, the
parameter value ranges for each PDP type are returned on a separate line.

The read command returns the current settings for each defined context. If no minimum profile was explicitly
specified for a context, simply OK will be returned, but default values will be used for that context.

This command allows the TE to specify a minimum acceptable profile which is checked by the MT against the
negotiated profile returned in the Activate PDP Context Accept message.
The set command specifies a profile for the context identified by the (local) context identification parameter,

Test Command

AT+CGQMIN=?

Response(s)

+CGQMIN:

<PDP_type>

, (list of supported

s), (list of supported

<delay>

s), (list of

supported

s), (list of supported

<peak>