Siemens MC55 사용자 설명서
MC55 AT Command Set
3. Status Control Commands
s
m
obile
MC55_ATC_V01.05
Page 63 of 469
2/10/04
Confidential / Released
3.
Status Control Commands
The AT Commands described in this chapter allow the external application to obtain various status information
from the MC55.
from the MC55.
3.1
AT+CMER Mobile Equipment Event Reporting
This command controls details of the "
" URC presentation related to
. If registered
via these commands the URCs are sent whenever a value of the related indicator changes.
In addition,
In addition,
" URCs related to
. For details refer to
and
, parameter
. After
has been switched on, URCs for all reg-
istered indicators will be issued.
Syntax
Test Command
AT+CMER=?
Response(s)
+CMER:
(list of supported
s), (list of supported
s), (list of
supported
s)
OK
Read Command
AT+CMER?
Response(s)
+CMER:
,
OK
Write Command
AT+CMER=
[,
[,
[,
]]]]]
Response(s)
OK
ERROR
+CME ERROR
PIN
ASC0
ASC1
MUX1
MUX2
MUX3
%
%
%
%
%
%
Reference(s)
GSM 07.07