Siemens SL370 사용자 설명서

Using several handsets

Gigaset SL375 / AUS / A31008-M1903-C401-1-7619 / registr_sett.fm / 14.8.07

ion 4,

.09.

2005

You will hear the error tone (descending

tone sequence) if you assign an internal

number twice.

Repeat the procedure with a free

number.

Using a handset as a
room monitor

If the room monitor is activated, a previ-

ously stored destination number is called

as soon as a set noise level is reached. You

can store an internal or external number

in your handset as the destination

number.
The room monitor call to an external

number stops after around 90 seconds.

The room monitor call to an internal

number (handset) stops after approx.

3 minutes (depending on the base sta-

tion). While the room monitor is activated,

all keys are locked except the end call key.

The handset's speaker is muted.
When the room monitor is activated,

incoming calls to the handset are indi-

cated without a ringer tone and are only

shown on the screen. The display and key-

pad are not illuminated and advisory

tones are also turned off.
If you accept an incoming call, the room

monitor mode is suspended for the dura-

tion of the call, but the function remains

activated.
If you deactivate then reactivate the hand-

set, the room monitor mode remains acti-

vated.

Activating the room monitor and

entering the number to be called

Room Monitor

Change multiple line input:

Room M.:

Select

to activate.

Call to:

External number:

Select the number from the directory

(press display key

) or enter it

directly. Only the last 4 digits are dis-

played.
Internal number:

§Options§

INT

§OK§

s (select

handset or

Call All

if all registered hand-

sets are to be called)

§OK§

Level:

Set noise level sensitivity (

Low

High

Press

§Save§

to save the settings.

Caution!

– You should always check the operation

of the room monitor before use. For

example, test its sensitivity. Check the

connection if you are diverting the room

monitor to an outside number.

– When the function is switched on the hand-

set's operating time is severely reduced.

If necessary, place the handset in the

charging cradle. This ensures that the bat-

teries do not run down.

– Ideally the handset should be positioned 1

to 2 metres away from the baby. The micro-

phone must be directed towards the baby.

– The connection to which the room monitor

is diverted must not be blocked by an acti-

vated answer machine.