Siemens M75 사용자 설명서

다운로드
페이지 153
11
Getting started
© Siemens AG 2003, E:\Auftr
ag\Siemens\MobilePhones\M75 
Sirius\en\LA\SIR_Startup.fm
Template:
 X75, Version 2.
1; VAR Language: en; VAR issue date:
 050524
right page (11)
 of M75 Sirius FUG en, A31008-H7430-A1-1-7619 (04.06.2005, 09:01)
Charge battery
Charging procedure
The battery is not fully charged 
when delivered. Plug the charger 
cable into the bottom of the phone, 
plug the power supply unit into a 
mains power socket and charge for 
at least two hours
Y
Display during charging.
Charging time
An empty battery is fully charged af-
ter about 2 hours. Charging is only 
possible within a temperature range 
of +5 °C to 45 °C. If the temperature 
rises/falls 5 °C above/below this, the 
charge symbol flashes a warning. 
The mains voltage specified on 
the power supply unit must not be 
exceeded. 
Operating times
The operating time depends upon 
the respective conditions of use. 
Extreme temperatures considerably 
reduce the phone’s standby time. 
Avoid placing the phone in the sun 
or on a heater.
Talktime: up to 300 minutes 
Standby time: up to 250 hours
Charge icon not visible
If the battery has been discharged 
fully, the charge icon is not immedi-
ately visible when the power supply 
is plugged in. It will appear after up 
to two hours. In this case, the battery 
is fully charged after 3 to 4 hours.
Only use the plug-in power supply unit 
included in delivery!
Display while in service
Charge level display during opera-
tion (empty–full):
V
 
W
 
X
 
A beep sounds when the battery is 
nearly empty. The charge level of the 
battery is only displayed correctly 
after an uninterrupted charging/dis-
charging cycle. Therefore do not 
remove the battery unnecessarily
, and 
where possible, do not end the 
charging process prematurely. 
Additional information
The power supply unit heats up when used 
for long periods. This is normal and not 
dangerous.
If the battery is removed for longer than 
30 seconds, the clock must be reset.