Siemens TDMA 800 사용자 설명서

31.5.02

06-S46 Body.fm i 37 Eagle  Am Engl, A31008-H4500-A1-4-7619

©

Faxes and data may be transmitted 
and received when the phone is 
connected to a PC.  In order to do 
this, the phone must be connected 
via infrared or a data cable to a PC 
installed with data/fax 
communication software (available 
from a third party source). 

Fax and data services must be 
enabled by the service provider. 
Different networks support different 
types of fax/data reception. Contact 
your service provider for details.

Your service provider must provide 
you with a number for your 
telephone and a separate fax/data 
number.

Start your PC communication 
software program and enter the 
required destination phone number.

When a fax or data is being received, 
the call is signaled by a special ring 
and the type of call (either fax or 
data) will be displayed.

Start the communication software 
program in your PC to receive the 
fax/data

Z

Set this function on the phone 

transmission so that you can switch 
from voice mode to fax mode.

While the connection is being 
set up, the following soft key is 
briefly available:

Switch to 

 

mode; you may now 
send a fax.

(Only if a special fax or data number 
is not available). 
Start the required communication 
program in your PC and switch on 
the function at the phone 

during the 

call (the PC accepts the connection).

End transmission in the PC software 
and/or press 

 

-

.