Uniden EXI5660 Series 사용자 설명서

5

During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range 

limits of the base, your call will terminate within one minute.

If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve 

your problem, please call our Customer Hotline. See back cover page for contact information.

The 

charge/in use LED won't 

illuminate when the handset is 

placed in the base.

• Make sure the AC adapter is plugged into the base and wall outlet.

• Make sure the handset is properly seated in the base.

• Make sure the charging contacts on the handset are clean.

The audio sounds weak and/

or scratchy.

• Move the handset and/or base away from metal objects or appliances and try 

again.

• Press 

[delete/channel] during a call to help eliminate background noise.

• Make sure that the handset is not too far from the base.

Can’t make or receive calls.

• Check both ends of telephone line cord.

• Make sure the AC adapter is plugged into the base and wall outlet.

• Disconnect the AC adapter for a few minutes, then reconnect it.

• Change the digital security code (see page ).

• Make sure that the handset is not too far from the base.

• Check the dialing mode used by your telephone company.