Uniden D1364 사용자 설명서

I can’t make or receive 
calls.

 xCheck the telephone cord connection.
 xDisconnect the base AC adapter. Wait a few minutes, 

then reconnect it.

 xMake sure the base is plugged in.

The handset won’t ring.

 xMake sure the ringer is turned on.

The handset is not 
working.

 xCharge the battery for 15-20 hours. 
 xCheck the battery connection.

The handset won’t display 
CID information.

 xLet calls ring twice before answering.
 xMake sure your CID service is active.

I hear a beeping during 
a call.

 xThe battery is getting low. Check the handset for a low 

battery alert. Finish your conversation and return the 

handset to the cradle as soon as possible.

There’s a lot of noise or 
static on the line 

 xCheck for interference from appliances (microwave 

ovens, TVs, etc.) or wireless devices (baby monitors, 

WiFi equipment, etc.). Move the handset or base away 

from the interference source.

 xMove the handset closer to the base.
 xTurn the T-coil on for telecoil hearing aids (see p. 6).

 

x

A telephone line filter or DSL filter 

prevents services that use the phone 

line from causing interference on 

your phone. To get a line filter, 

contact your service provider or 

look in an electronics store.

 

x

Plug the filter into the telephone 

wall jack and plug the base into the 

filter. Make a test call to make sure 

the noise is gone.

If the liquid is only on the exterior 

housing of the base or handset, wipe 

it off and use as normal. If you can 

hear liquid inside the housing:
1.  Remove all compartment covers, 

and disconnect all cables and 

cords.

2.  If liquid is leaking from any vent 

or hole, turn the phone so that 

vent faces down. If not, place the 

largest vent face down.

3.  Let dry for at least 3 days. Check 

for liquid inside the phone before 

replacing compartment covers 

and reconnecting cords.