Motorola I580 사용자 설명서

다운로드
페이지 107
BASIC LEVEL CHECKS AND SELF TESTS:  Self-Test Procedures
68P80401P05
31
4.
Enter the new 4- to 8-digit GPS PIN.
5.
Press the Ok button.
6.
Enter the new 4- to 8-digit GPS PIN to confirm.
7.
Press the Ok button.
Change Password — changes your phone unlock code, security code SIM PIN, and GPS PIN.
Advanced Features
The Advanced menu contains advanced and rarely used Settings features.
Alert Timeout — controls the amount of time a tone continues to sound when you receive a 
message notification or call alert.
Headset/Spker—If you use a headset or similar device with your phone, you can set your 
phone to send incoming sound to the headset only, or to the headset and the speaker at the same 
time:
1.
From the main menu, select Settings > Advanced > Headset/Spker.
2.
Press the Ok button.
3.
Scroll to HdsetOnly to send incoming sound to the headset only.
 
 -or-
 
Scroll to Hdset&Spker to send incoming sound to the headset and the speaker at the same 
time.
4.
Press the Ok button.
Connectivity — Network ID sets the phone’s network IDs and their roaming options under the 
direction of your service provider; Master Reset lets your service provider to reset your service 
in the event of a security or provisioning problem.
Reset Defaults — Reset Settings returns all settings to their original defaults; Reset All returns 
all settings to their original defaults and erases all stored lists. Use only under the direction of 
your service provider.
Return to Home — controls how long the recent calls list displays after calls.
Airplane Mode — User option to stop unit from receiving/transmitting radio frequency. 
Settings > Advanced > Airplane Mode > OK > Off
 
Settings > Advanced > Airplane Mode > OK > On
 
Settings > Advanced > Airplane Mode > OK > [Help].
Phone Only — prevents your phone from making or receiving Private calls or group calls.
BaudRate — sets the baud rate at which your phone communicates with a laptop computer, PC, 
or similar device.
5.6.3
Call Performance Test
Use this test to verify the unit’s ability to complete interconnect and dispatch calls.
NOTE: To prevent FM noise interference during testing, be sure to separate the test units by an 
appropriate distance.