Motorola V8162 사용자 설명서
12
Introduction to Batteries
Each battery is shipped in an uncharged state with a protective
clip on it. Before you can use your phone, you will need to
remove the clip from the battery and charge it.
clip on it. Before you can use your phone, you will need to
remove the clip from the battery and charge it.
Battery Clips
It is a good idea to save the protective clip to store and carry the
battery when not in use. The clip prevents objects from touching
the battery terminals, thereby reducing the risk of injury or
damage from a short circuit.
battery when not in use. The clip prevents objects from touching
the battery terminals, thereby reducing the risk of injury or
damage from a short circuit.
Removing the Main Battery Clip
Attaching the Main Battery Clip
1.
Press
Tab
Tab
Hold one end of the battery/clip in one hand.
Press down on the tab at the opposite end of
the clip with your other hand.
Press down on the tab at the opposite end of
the clip with your other hand.
2.
Remove
Clip
Clip
Rotate the clip away from the battery.
1.
Insert
Side
Side
Insert one end of the battery into the clip, so
that the battery fits the notches on the clip.
that the battery fits the notches on the clip.
2.
Click
Latch
Latch
Click the other side of the battery into place.
1.
2.
1.
2.