Nokia 252C 사용자 설명서
67
The following is an example of a number you could store
in your phone:
in your phone:
This number contains a phone number (18005551212), a
wait character, an access number (‘1234’), a wait charac-
ter, and a password (‘3434’) - 18005551212w1234w3434.
wait character, an access number (‘1234’), a wait charac-
ter, and a password (‘3434’) - 18005551212w1234w3434.
When you recall this number from memory and press
SEND, the phone:
SEND, the phone:
•
Dials 18005551212 (the stored number), then:
•
‘Waits’ for you to press
SEND again. When you do,
the phone sends the numbers 1234.
•
‘Waits’ for you to press
SEND again, then sends the
numbers 3434.
The following example shows storing ‘pause’ characters
as well as ‘wait’ characters (Note that a ‘wait’ character
must still be included, as shown, to separate the phone
number from the following digits):
as well as ‘wait’ characters (Note that a ‘wait’ character
must still be included, as shown, to separate the phone
number from the following digits):
18005551212w1234p3434
When you recall this number from memory and press
SEND, the phone:
SEND, the phone:
•
Dials 18005551212 (the stored number), then
•
‘Waits’ for you to press
SEND again. When you do,
the phone sends the numbers 1234. It then:
•
Pauses for 2.5 seconds, then sends the numbers
3434.
3434.
Note: If the keypad tones have been set to Off, the Touch
Tones will still be sent, but you will not hear them.
Tones will still be sent, but you will not hear them.
Pressing
MENU SEND sends a displayed number as a
Touch Tone.
To end the call, press
END after the phone sends the
Touch Tones and has returned to the normal call mode.