Polycom 8002 사용자 설명서
SpectraLink 8002 Wireless Telephone Overview
PN: 1725-36034-001_C.doc
13
Quick Start Guide
1. A wireless LAN must be properly configured and operational
through the use of 802.11 wireless APs. Ensure WMM is enabled
on the APs.
on the APs.
2. Configure a TFTP server on the LAN. The TFTP server is used to
load the handset software and SIP configuration files into the
handsets. See Chapter 2 SpectraLink 8002 Wireless Telephone
Configuration for DHCP information.
handsets. See Chapter 2 SpectraLink 8002 Wireless Telephone
Configuration for DHCP information.
3. The supported SIP system components must be connected to your
network and completely operational.
4. Visit
to download the latest handset
software and example SIP configuration files.
5. Ensure the handset software is properly loaded on the TFTP
server that has been designated for the handset code. See Chapter
3 Software License and Protocol Management, section Configuration
Process.
3 Software License and Protocol Management, section Configuration
Process.
6. Create/modify configuration files on the SIP TFTP server to
define parameters for the SIP application. See Chapter 4
Programming the SIP Handset Features, section SIP TFTP Server
Configuration Files. The TFTP server may be the same one
referenced in step 2 above.
Programming the SIP Handset Features, section SIP TFTP Server
Configuration Files. The TFTP server may be the same one
referenced in step 2 above.
7. Configure your handset per Chapter 2 SpectraLink 8002 Wireless
Telephone Configuration. Ensure these configuration options are
set:
Set
set:
Set
License Option
to
22
.
a With the handset powered off, press and hold the
Power Off
key. While holding the
Power Off
key, press and release the
Power On
key.
b Select
Phone
Config
option. Press
OK
softkey.
c Select
License
Option
. Press
OK
softkey.
d Select
Set
Current
. Press
OK
softkey.
e Select
Type
022
. Press
OK
softkey.