Palm 680 사용자 설명서

C O M M O N   Q U E S T I O N S

222

11

Mac: Find the Palm folder on your Mac 
hard drive. Double-click the HotSync 
manager 

 icon in the Palm folder. In 

the Connection Settings panel, set the 
Local Setup port to Palm USB.

3 Synchronize. If the synchronization is 

successful, you do not need to 
complete the remaining steps.

4 Perform a soft reset (see Performing a 

5 Synchronize. If the synchronization is 

successful, you do not need to 
complete the remaining steps.

6 If problems persist and you’re 

synchronizing through a USB hub, try 
connecting the sync cable to a different 
USB port or directly to your computer’s 
built-in USB port. 

7 Synchronize. If the synchronization is 

successful, you do not need to 
complete the remaining steps.

8 Check the multi-connector on the 

bottom of your smartphone for debris or 

discoloration. Carefully clean the 
connector by dipping a cotton swab in 
some rubbing alcohol and gently wiping 
the metal contacts on the connector. 
Try to sync again.

9 Check the connector on the USB sync 

cable for integrity and cleanliness. Make 
sure the pins on the connector are 
straight, protruding, and not damaged. If 
the cable appears to be damaged, stop 
here and locate another USB sync 
cable.

Uninstall 

Palm Desktop software. Click Start, 
select Settings, select Control Panel, 
select Add or Remove Programs, 
select Palm Desktop software, and 
then click Change/Remove.

Mac computers do not provide an 

option for uninstalling Palm Desktop 
software. Contact Technical Support if the 
problem persists after completing step 7.

11 Reboot your computer.

12 Reinstall Palm Desktop software from 

the Palm Software Installation CD that 
came with your Treo 680.