Philips SE735 사용자 설명서
15
EN
Install
3. Press
m
SELECT
to enter
Set Date/Time
.
4. Enter current time (HH:MM) and current date (DD/MM/YY) and press
m
OK
.
Now, you are ready to use your phone.
Basic operations of your SE735
Make a call
Enter the phone number (maximum 20 digits) and press
r
to dial the number.
For details, please refer to "Make a call" on page 21.
Answer or end a call
Press
r
key to answer a call.
Press
e
key to end a call.
For details, please refer to "Answer a call" on page 21 and "End a call" on page 22.
Switch the handset on/off
Press and hold
e
key for 3 seconds to switch off the handset in stand-by mode.
Short press
e
key to switch on the handset again.
j
Keypad lock/unlock
Press and hold
*
key for 2 seconds to lock or unlock the keypad in stand-by mode.
Paging
The paging feature enables you to locate a missing handset if the handset is in range and contains charged
batteries.
Short press
batteries.
Short press
c
key on the base. The handset starts to ring.
Once retrieved, press any key on the handset to end the paging.
Stand-by mode
If the handset is not used for 30 seconds in settings mode, review mode, edit mode, etc. it will automatically
return to stand-by mode. It will also return to stand-by mode automatically when the handset is placed back on
the base station.
return to stand-by mode. It will also return to stand-by mode automatically when the handset is placed back on
the base station.
WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may
be updated after each call. The availability of date & time update is dependent on your network
provider. Please check the date & time settings in your ISDN system or contact your network
provider.
be updated after each call. The availability of date & time update is dependent on your network
provider. Please check the date & time settings in your ISDN system or contact your network
provider.