Polycom VVX 500 사용자 설명서
Polycom VVX 500 Business Media Phone User Guide
60
Broadcasting Messages Using Push-to-Talk and Group
Paging
Paging
The Group Paging feature enables you to make pages—one-way audio announcements—to users
subscribed to a page group. The Push-to-Talk (PTT) feature is a collaborative tool that enables you to
exchange broadcasts to users subscribed to a PTT channel, much like a walkie-talkie. Your system
administrator can set up both features on your phone.
subscribed to a page group. The Push-to-Talk (PTT) feature is a collaborative tool that enables you to
exchange broadcasts to users subscribed to a PTT channel, much like a walkie-talkie. Your system
administrator can set up both features on your phone.
Your system administrator can define up to 25 paging groups for Group Paging mode or Channels for
PTT mode. Your system administrator may assign a label to each group or channel that easily identifies
the phones in the group or channel, such as All, HR Dept, Shipping Staff, or Executives. Each group or
channel will have one of the following priorities:
PTT mode. Your system administrator may assign a label to each group or channel that easily identifies
the phones in the group or channel, such as All, HR Dept, Shipping Staff, or Executives. Each group or
channel will have one of the following priorities:
Normal By default, broadcasts sent to Groups/Channels 1 to 23 are considered Normal broadcasts. If
two users begin a broadcast on the same group/channel at the same time, the phone with the lower
serial number will continue to transmit while the other phone will enter the receiving state. By default,
all phones are configured to receive broadcasts sent to Group/Channel 1.
two users begin a broadcast on the same group/channel at the same time, the phone with the lower
serial number will continue to transmit while the other phone will enter the receiving state. By default,
all phones are configured to receive broadcasts sent to Group/Channel 1.
Priority By default, broadcasts sent to Group/Channel 24 are considered Priority broadcasts. A Priority
broadcast will interrupt Normal broadcasts or active calls. All phones receive Priority broadcasts unless
Do Not Disturb is enabled. Phones play Priority broadcasts at the phone’s current audio level.
broadcast will interrupt Normal broadcasts or active calls. All phones receive Priority broadcasts unless
Do Not Disturb is enabled. Phones play Priority broadcasts at the phone’s current audio level.
Emergency By default, broadcasts sent to Group/Channel 25 are considered Emergency broadcasts. An
Emergency broadcast will interrupt Normal broadcasts, Priority broadcasts, and active calls and plays
out at near maximum volume even if Do Not Disturb is turned on.
Emergency broadcast will interrupt Normal broadcasts, Priority broadcasts, and active calls and plays
out at near maximum volume even if Do Not Disturb is turned on.
Push-to-Talk Mode
Your system administrator can enable your phone to operate in a broadcast mode called Push-to-Talk
(PTT). In order to send and receive PTT broadcasts, you have to subscribe to PTT channels.
(PTT). In order to send and receive PTT broadcasts, you have to subscribe to PTT channels.
PTT broadcasts are collaborative: you can transmit messages and listen to replies.
Sending and Receiving PTT Broadcasts
By default, you’re subscribed to Channels 1, 24, and 25. This means that you can send and receive PTT
broadcasts on Channels 1, 24, and 25.
broadcasts on Channels 1, 24, and 25.
When you end a PTT broadcast, the channel remains open and enters a waiting period. This waiting
period gives people who received the broadcast a chance to respond. If no one responds within the
waiting period, the channel closes.
period gives people who received the broadcast a chance to respond. If no one responds within the
waiting period, the channel closes.