Omega OSP SERIES 사용자 설명서

30

e

Set

°C

e

Set

°C

•

  Press the <▲> or <▼> key to enable (or to disable) the thermocouple auxiliary input operation.

e

Set

°C

•

  With the compensation function activated, press <ENTER> to begin the measurements in order to calculate the

ambient temperature average value. Point OSP  towards objects and surfaces surrounding the target, making a scan
over those items and acquiring corresponding temperature values. A counter (from 1 to 255) indicates the number of
measurements considered (

 displays the first value read during this procedure). These acquisitions have to be

done with emissivity 

ε

=1, hence when acquisition starts the emissivity value has set automatically to one.

 

•

 Press 

<ENTER> to stop acquisition and to confirm the read ambient temperature (at this moment 

 will display

the last acquired temperature value).

 

•

  Press the <SEL> key to select the new configuration step or press <Trigger> to switch the instrument off. The new

selections will be automatically memory stored.

To execute the temperature measurements with TAM, switch 

 on and set the emissivity to the correct target value.

•

  Press the <SEL> key until the following page is displayed :

e

Set

°C

Lock

The above page indicates the version of the firmware installed in your instrument.
This information is extremely important in all inquires for technical assistance support.

•

  Press the <SEL> key until the following page is displayed :

e

Set

°C

Lock

The above page indicates the serial number of the instrument. Such number is extremely important for any request of
technical assistance support.