Radio Shack CT-400 사용자 설명서
43
Note: To exit without changing the calling card
settings (if you are changing only the access
number, for example), press
settings (if you are changing only the access
number, for example), press
.
6. Enter the card number, then press
.
The phone briefly displays
STORED
to confirm
that the selected card information is activated
and stored.
and stored.
To clear a stored calling card number, follow Steps
1–4 and select the setting
1–4 and select the setting
NO
CARD
in Step 4. The
phone erases all card information and exits the
menu.
menu.
Using a Stored Calling Card Number
Follow these steps to make a long-distance call us-
ing the calling card number you stored.
ing the calling card number you stored.
1. Enter the desired area code and phone num-
ber, then hold down
until the phone dis-
plays
CARD
CALL
and
IN
USE
.
CARD
CALL
remains on the display until the access num-
ber is sent to the network, then the phone
prompts you to wait for a tone or voice prompt
(
ber is sent to the network, then the phone
prompts you to wait for a tone or voice prompt
(
WAIT
FOR
PROMPT
).
Note: If no calling card is stored in memory,
the phone makes a normal call to the phone
number you entered.
the phone makes a normal call to the phone
number you entered.
CLR
OK
SEND
17-1101.fm Page 43 Wednesday, July 21, 1999 9:57 AM