Gossen 15122 사용자 설명서
GOSSEN Foto- und Lichtmeßtechnik
13
ALARM CLOCK
– Use function button to enter the function
– Use function button to enter the function
"ALARM CLOCK" and hold it pressed
down until the OK-signal will sound.
The time of the alarm clock is set in the
same way as the watch.
down until the OK-signal will sound.
The time of the alarm clock is set in the
same way as the watch.
– Hold the function button until the
OK-signal sounds.
– The alarm is activated or deactivated
with the measuring button.
– When the alarm is activated it is shown
in the display with a bell symbol.
– When the alarm is sounded it will sound
each second for 1 min. It can be stopped
by pressing either the measuring key or
the function button.
by pressing either the measuring key or
the function button.
2.7 Measuring temperatures
– Use the function button to select the
– Use the function button to select the
function TEMPERATURE and hold the
button pressed down until the OK-signal
sounds. To change between °C or °F
read-outs, press and hold the function
button until the display changes.
button pressed down until the OK-signal
sounds. To change between °C or °F
read-outs, press and hold the function
button until the display changes.
The Digisix will indicate the actual ambient
temperature. The temperature probe is
incorporated in the meter housing.
As a result, the temperature measurement
may be affected if you are holding the meter
in your hand. If you attach the Digisix with
the clip to your camera, these errors can be
avoided.
temperature. The temperature probe is
incorporated in the meter housing.
As a result, the temperature measurement
may be affected if you are holding the meter
in your hand. If you attach the Digisix with
the clip to your camera, these errors can be
avoided.